Setup and user guide
Getting started with ValetPro
Everything you need to set up your company and run your first shift, without training. Six setup steps, then a short guide for each person on the team: drivers, dispatchers, guests and managers.
- About an hour to set up
- Android phones for drivers
- Nothing for guests to install
Part 1 — Set up (company admin)
Before you start
Setting up takes about an hour. You will need:
What to have ready
- 1.Your ValetPro login (email and temporary password) — sent to you when your account is created.
- 2.A computer with a web browser, for the dashboard.
- 3.An Android phone for each driver on shift. The driver app is Android only.
- 4.A printer, for the venue QR poster and the key-hook labels.
- 5.For each venue: its name, address, how many parking zones it has, and whether it uses paper tickets.
- 6.For each driver: full name, email address and an employee ID. For each dispatcher: name, email and the venue they run.
Step 1 — Sign in and secure your account
Sign in
- 1.Go to valetpro.ae/login and sign in with the email and temporary password you were given.
- 2.Open Settings → Security → Change Password and set your own password straight away.
- 3.Check Settings → Company Information and correct your company name and contact details if needed.
Settings → Subscription shows your plan. Some features below depend on it — each one says which plan it needs.
Step 2 — Add your venues
A venue is one site you run valet at — a hotel, a restaurant, a hospital, a mall entrance.
Add a venue
- 1.Open Venues → Add Venue.
- 2.Enter the Venue Name, choose its Type, add the Address (optional) and City.
- 3.Tick “This venue still uses paper tickets” if your stand hands out numbered paper tickets. Drivers can still choose either way on any car.
- 4.Save. Repeat for each venue. Your plan sets how many venues you can add; if you reach the limit, the screen tells you.
Print the venue QR code
- 1.On the venue's card, press QR Code. If the card says “QR code not set up”, add a short code first (lowercase letters, numbers and hyphens, e.g. palm-hotel).
- 2.Print it and place it at the valet stand and the exit. Guests who lose their link scan it and find their car by plate or ticket number.
Add the venue's logo (optional)
Professional and above- 1.On the venue's card, press Add logo and upload a PNG, JPEG or WebP under 1 MB. Guests then see the venue's logo on their page.
Step 3 — Set up the key rack
Nothing is ever attached to the guest's keys. Instead, each hook on your rack gets a printed label, and drivers scan the hook when they hang keys and again when they collect them.
Create the rack and its hooks
- 1.Open Venues → Key rack and choose the venue.
- 2.Under Racks, enter a Rack name. If the venue has one rack, leave Zone served empty. If it has a rack per parking zone, enter the zone exactly as drivers will type it.
- 3.Press Add rack.
- 4.Under Add hooks, choose the rack, keep the internal prefix, and add hooks From 1 To 100. Use 1–100 on every rack: hook 100 is where tickets ending in “00” hang.
Print and stick the labels
- 1.Open the hook labels from the Key rack page, press Print now (or Download to print later) and stick each label on its hook.
- 2.The rule stays the one your team already knows: keys hang on the last two digits of the ticket number. The app suggests the hook and warns if it is already in use.
Step 4 — Add parking zones (optional)
Zones
Professional and above- 1.Open Venues → Parking guidance and choose the venue.
- 2.Add each zone with its Zone name (as drivers will type it), Total spaces (leave blank if you are not sure) and Walk order (1 = closest to the stand).
- 3.Drivers then see which zones have room when they park.
Leave individual bays for later. Add them only after you have watched the zone counts against reality for a couple of weeks.
Step 5 — Add your team
Add drivers
- 1.Open Staff → Add Driver.
- 2.Enter Full name, Email, a Temporary password (at least 8 characters), Phone (optional), the Employee ID and the employment type (permanent or subcontracted).
- 3.The employee ID is what the driver types to sign in, so make it simple — for example HL001. It must be unique across ValetPro; if it is taken, add your company's initials.
- 4.Give each driver their employee ID and temporary password.
Your plan sets how many drivers you can have. Existing drivers always keep working — only adding a new one is blocked at the limit.
Add dispatchers
- 1.Open Staff → Add Dispatcher, enter their details and choose the venue they run.
- 2.Dispatchers sign in to the dashboard at valetpro.ae/login and work from Live Operations.
Add area managers (optional)
Professional and above- 1.Open Area managers → Add area manager, enter their name, email and a temporary password, press Create, then assign the venues they look after.
- 2.They sign in at valetpro.ae/login and see an Operations report across their venues.
Looking after accounts
- 1.Forgotten password: on the Staff page, press Reset Password next to the person and give them the new temporary one.
- 2.Someone leaves: press Deactivate next to them on the Staff page. They can no longer sign in; their history stays.
Step 6 — Put the driver app on each phone
Install and sign in
- 1.On each Android phone, install ValetPro Driver from Google Play. The link is also at valetpro.ae/driver-app.
- 2.Open the app and sign in with the Employee ID and password.
- 3.Allow camera access when asked — it is used for the plate scan, the condition video and the hook labels.
- 4.Press Check In to Start Shift and choose the venue. The driver is now on shift.
Do a test car with one driver before your first real shift: take a car in, hang the keys, request it from a phone, hand it back.
Part 2 — Run it every day
Running a shift — drivers
Taking a car in
- 1.Busy door, no paper ticket: press Take a Car — no ticket, enter the plate and press take. The guest's QR appears on screen — the guest scans it with their phone camera. Finish the car's details later from Cars to finish.
- 2.Paper ticket: press Park a Car — paper ticket and scan the ticket (or type its number).
- 3.Scan the plate or type it (emirate, code, number). Check the make, model and colour the app suggests.
- 4.Next: Location & Keys — enter the zone or bay, and say whether you have the keys.
- 5.Next: Record Video — walk round the car, all four sides, 5 to 45 seconds. A car cannot be marked parked without it.
- 6.Hang the keys on the hook the app suggests and scan that hook's label. If keys were parked without a hook, the home screen shows them under Log keys.
Damage you notice at drop-off
- 1.Note it with a photo while taking the car in. The guest sees it on their page straight away, while they are still there.
Moving a car
- 1.Press Move a Car, choose the car and enter where you left it.
Bringing a car back
- 1.A job appears when the guest requests their car or a dispatcher assigns it. Accept it (or decline with a reason).
- 2.Go to the hook the app names and scan it to confirm you have the right keys.
- 3.Bring the car round and mark each step: on the way, arrived.
- 4.Hand over: scan the pickup pass on the guest's phone, type its six-digit code, or check their paper ticket.
- 5.If none is possible (flat phone, lost ticket), choose the override and write the reason. It is recorded against your name.
- 6.Confirm delivery.
No signal in the basement? Accepting a job, marking the car collected and handing it over are saved on the phone and sent when the signal returns. Taking a new car in needs a connection.
Damage you find when collecting
- 1.Open the ticket and press Report damage found on this car. It goes to a manager to review against the intake video.
Ending your shift
- 1.Press End Shift. The app warns you if any car or key is still in your hands — finish or hand those over first.
Running a shift — dispatchers
Live Operations
- 1.Every car at your venue is on the board, with its status, driver, bay, key hook and how long the guest has waited.
- 2.When a guest requests a car it appears at once. Press Assign Driver and pick who goes.
- 3.If nobody assigns a request within about 90 seconds, ValetPro gives it to the on-shift driver who has waited longest for a job, within a couple of minutes. Cars with no keys are never sent automatically — you decide when the guest is present.
- 4.Guest at the desk without their phone? Search by plate, ticket number, make, model, colour or phone number, press Retrieve Vehicle, then assign a driver.
- 5.Open any car to see its details, condition video and history.
End of the night (hotels)
- 1.When the valet team finishes, press End valet operation, enter the name of the person at reception accepting the keys, and confirm. Print the manifest of every car, key and bay left.
- 2.Each guest's page then tells them their keys are at reception, with their ticket number and where the car is.
- 3.Reception confirms each collection. Anything not confirmed within 48 hours is closed automatically and marked unconfirmed.
What your guests do
Guests need nothing installed and no account. Share this with front-of-house staff so they can help.
The guest's page
- 1.At drop-off the guest scans the QR the driver shows them. Their page opens in the phone's browser, in English or Arabic.
- 2.They see their car, its status and where it is parked.
- 3.Request my car when they are ready, or book a pickup time up to four hours ahead.
- 4.At the door they show the pickup pass on their page. The code changes regularly and stops working once the car is handed over.
- 5.They can report the condition of their car themselves, and rate the service afterwards.
- 6.Forgot something in the car? They can request it again from the same page for 30 minutes after hand-back.
- 7.Lost the link? They scan the venue QR at the stand and search by plate or ticket number.
Managing your operation — company admin
Day to day
- 1.Dashboard — today's cars, waiting times and anything that needs attention.
- 2.Tickets — open any car to see who took it, parked it, fetched it and handed it back, with the condition video, key hook and bay.
- 3.Damage review — damage drivers found when collecting a car. Compare it with the intake video and record: pre-existing, occurred in our care, inconclusive or no damage.
- 4.Disputes — when a guest raises a concern, open a dispute on the ticket, play the intake video, and record the outcome with a note.
- 5.Attendance — who signed on, who was late. A rostered driver who has not signed on an hour after their shift starts is flagged for you to rule on.
- 6.Ticket cleanup — remove cancelled tickets after a dry run shows what would go.
Condition videos are deleted 48 hours after hand-back, except while a dispute is open (and for 30 days after it is settled), while reported damage is waiting for review, or while a guest's own report is open.
Reports and planning
- 1.Reports — volumes, how long guests waited and busiest hours. Driver performance and guest feedback are included from Professional.
- 2.Patterns — how long guests stay and when cars arrive and are requested, by day and hour.
- 3.Staffing — how many drivers each hour needs, from your venue's own history.
- 4.Event planning — add a wedding or conference with the extra cars expected, and see the drivers needed hour by hour.
- 5.Billing — your plan, invoices and payment status.
Staffing is on every plan. Patterns and detailed reports need Professional. Event planning needs Enterprise.
What each plan includes
| Feature | Essential | Professional | Enterprise |
|---|---|---|---|
| Condition video, key rack, guest page, live dispatch | ✓ | ✓ | ✓ |
| Damage review, disputes, attendance, staffing view, reception handover | ✓ | ✓ | ✓ |
| Drivers per venue | Up to 15 | Unlimited | Unlimited |
| Detailed reports, patterns, parking guidance | — | ✓ | ✓ |
| Area manager reports, venue logo on guest pages | — | ✓ | ✓ |
| Your company's logo, event planning, priority support | — | — | ✓ |
Prices are on the pricing section. In-house promotions on guest pages (Enterprise) are set up by us with you.
Common problems
A driver cannot sign in.
Check they are typing the employee ID you created on the Staff page (capitals and spaces do not matter). If they have forgotten the password, press Reset Password next to them on the Staff page. A deactivated driver cannot sign in.
A venue is missing from the driver's check-in list.
Drivers only see your company's active venues. Check the venue is listed on the Venues page.
“That employee ID is already in use”.
Employee IDs are unique across all of ValetPro, because drivers sign in with the ID alone. Choose another, for example by adding your company's initials.
The app suggests the wrong key rack.
A car is matched to a rack by its parking zone. Make sure the rack's “Zone served” reads the same as what drivers type. The Key rack page lists the zones drivers actually use.
A guest cannot find their car.
Ask them to scan the venue QR at the stand and search by plate or ticket number. A dispatcher can also find the car on Live Operations and request it for them.
The guest's phone is dead at handover.
Check their paper ticket if they have one, or use the override and write the reason. It is recorded, so it can be reviewed later.
A screen says my plan does not include something, or I have hit a limit.
Your existing setup keeps working. Contact us to change your plan.
Need help?
If something here does not match what you see, or you are stuck, contact us — WhatsApp is fastest.